Tektronix MSO56 - DISplay:WAVEView<x>:PLOT:PLOT<x>:STATE; DISplay:WAVEView<x>:PLOT:PLOT<x>:VERTical:POSition

Commands listed in alphabetical order
OFF disables au
to-scaling the specified plot in the specified waveview.
ON enables auto-scaling the specified plot in the specified waveview.
Examples
DISplay:WAVEView1:PLOT:PL OT1:AUTOScale 1 enables auto-scaling the
specified plot in the specified waveview.
DISplay:WAVEView1:PLOT:PL OT1:AUTOScale? might return
:DISPLAY:WAVEVIEW1:PLOT:P LOT1:AUTOSCALE 0 indicating that
auto-scaling for plot 1 is off.
DISplay:WAVEView<x>:PLOT:PLOT<x>:STATE
This command sets or queries the s tate of the specified time trend plot waveform
in the specified waveview.
Group
Display Control
Syntax
DISplay:WAVEView<x>:PLOT: PLOT<x>:STATE {<NR1>|OFF|ON}
DISplay:WAVEView<x>:PLOT: PLOT<x>:STATE?
Arguments
<NR1> = 0 disables the specified plot in the specified waveview; any other value
turnsthisfeatureon.
OFF disables the specified plot in the specified waveview.
ON enables the specified plot in the specified waveview.
Examples
DISplay:WAVEView1:PLOT:PL OT1:STATE OFF disables the specified plot in
the specified waveview.
DISplay:WAVEView1:PLOT:PL OT1:STATE? might return
:DISPLAY:WAVEVIEW1:PLOT:P LOT1:STATE 1 indicating the
specified plot in the specified waveview is on.
DISplay:WAVEView<x>:PLOT:PLOT<x>:VERTical:POSition
This command sets or queries the vertical position of the specified time trend in
the specified waveview in absolute units.
Group
Display Control
2-306 MSO54, MSO56, MSO58, MSO58LP Programmer