Tektronix MSO56 User Manual

Commands listed in alphabetical order
Group
Digital
Syntax
CH<x>_DALL:LABel:FONT:TYPE <QString>
Arguments
<QString> is the font type.
Examples
CH1_DALL:LABel:FONT:TYPE "Monosapce" sets the font to a monospace
font.
CH1_DALL:LABel:FONT:TYPE? might return :CH1_D ALL:LABEL:FONT:TYPE
"Frutiger LT Std 55 Roman"
.
CH<x>_DALL:LABel:FONT:UNDERline
This command sets or queries the underline state of the specified digital group.
The channe l is specified by x.
Group
Digital
Syntax
CH<x>_DALL:LABel:FONT:UNDE Rline {ON|OFF|<NR1>}
Arguments
OFF argument turns off underline font.
ON argument turns on underline font.
<NR1> = 0 turns off underline font; any other value turns on underline font.
Examples
CH1_DALL:LABel:FONT:UNDERl ine ON specifies an underlined font.
CH1_DALL:LABel:FONT:UNDERl ine? might return
:CH1_DALL:LABEL:FONT:UNDER LINE 0 indicating underline is off.
CH<x>_DALL:LABel:NAMe
This command se t s or queries the label of the specified digital group. The channel
is specified by x.
Group
Digital
Syntax
CH<x>_DALL:LABel:NAMe <QString>
MSO54, MSO56, MSO58, MSO58LP Programmer 2-207

Tektronix MSO56 Specifications

General

Brand	Tektronix
Model	MSO56
Category	Test Equipment
Language	English