Tektronix MSO56 - DISplay:WAVEView<x>:INTENSITy:GRATicule; DISplay:WAVEView<x>:INTENSITy:WAVEform

Commands listed in alphabetical order
Group
Display Contro
l
Syntax
DISplay:WAVEView<x>:GRAti cule {GRId|TIMe|FULl|NONe}
DISplay:WAVEView<x>:GRAti cule?
Arguments
GRId specifies a frame and grid only.
TIMe specifies a time graticule only.
FULl specifi es a frame, a grid and cross hairs.
NONe specified no graticule.
Examples
DISplay:WAVEView1:GRAticu le TIME specifies a time graticule.
DISplay:WAVEView1:GRAticu le? might return
:DISPLAY:WAVEVIEW1:GRATIC ULE GRID indicating the graticule is a g rid.
DISplay:WAVEView<x>:INTENSITy:GRATicule
This command sets or queries the graticule saturation level.
NOTE.
WAVEView<x> is the specified waveview and must be WAVEView1 .
Group
Display Control
Syntax
DISplay:WAVEView<x>:INTEN SITy:GRATicule <NR2>
DISplay:WAVEView<x>:INTEN SITy:GRATicule?
Arguments
<NR2> is the gra
ticule saturation level.
Examples
DISplay:WAVEView1:INTENSI Ty:GRATicule 75 sets the s aturation level
to 75%.
DISplay:WAVEView1:INTENSI Ty:GRATicule? might return
:DISPLAY:WAVEVIEW1:INTENS ITY:GRATICULE 66.0000 indicating the
saturation level is at 66%.
DISplay:WAVEView<x>:INTENSITy:WAVEform
This command sets or queries the waveform s
aturation level.
2-302 MSO54, MSO56, MSO58, MSO58LP Programmer