Tektronix MSO56 User Manual

Commands listed in alphabetical order
Arguments
<NR3> is the per
centage (where 100% is equal to TOP) used to calculate the m id
reference level whe n the measurement Ref level method is set to Percent.
Examples
MEASUrement:MATH2REFLevels :PERCent:RISELow 5 sets the reference
level to 5% of TOP.
MEASUrement:MATH2REFLevels :PERCent:RISELow? might return
:MEASUREMENT:MATH2:REFLEVE LS:PERCENT:RISELOW 10.000 0 indicating
the reference level is set to 10% of TOP.
MEASUrement:MATH<x>:REFLevels:PERCent:RISEMid
This command sets or queries the percentage (where 100% is equal to TOP and
0% is equal to BASE) used to calculate the mid reference level of the rising edge
when the measurement ref level method is set to percent. The math number is
specified by x.
Group
Measurement
Syntax
MEASUrement:MATH<x>:REFLev els:PERCent:RISEMid <NR3>
MEASUrement:MATH<x>:REFLev els:PERCent:RISEMid?
Arguments
<NR3> is the percentage (where 50% is equal to MID) used to calculate the mid
reference level whe n the measurement Ref level method is set to Percent.
Examples
MEASUrement:MATH2:REFLevel s:PERCent:RISEMid 50 sets the reference
level to 50% of TOP.
MEASUrement:MATH2:REFLevel s:PERCent:RISEMid? might return
:MEASUREMENT:MATH2:REFLEVE LS:PERCENT:RISEMID 50.000 0 indicating
the reference level is set to 50% of TOP.
MEASUrement:MATH<x>:REFLevels:PERCent:TYPE
This command specifies or queries the reference level percent type for the
me
asurement. The math number is specified by x.
Group
Measurement
Syntax
MEASUrement:MATH<x>:REFLev els:PERCent:TYPE
{TENNinety|TWENtyeighty|CU STom}
MSO54, MSO56, MSO58, MSO58LP Programmer 2-419

Tektronix MSO56 Specifications

General

Brand	Tektronix
Model	MSO56
Category	Test Equipment
Language	English