Commands listed in alphabetical order
Arguments
TRACK ties the n
avigational functionality of the two cursors together. For cursor A
adjustments, this ties the movement of the two cursors together; however, cursor
B continues to move independently of cursor A.
INDEPENDENT allows independent adjustment of the two cursors.
Examples
DISplay:REFFFTView5:CURSo r:MODe TRACK sets the cursors to track
together.
DISplay:REFFFTView5:CURSo r:MODe? might return
:DISPLAY:REFFFTVIEW5:CURS OR:MODE INDEPENDENT indicating
the cursors move independently.
DISplay:REFFFTView<x>:CURSor:ONEOVERDELTATVALUE? (Query Only)
This command returns the one over delta T cursor readout value of the s pecified
cursor in the specified view.
Group
Cursor
Syntax
DISplay:REFFFTView<x>:CUR Sor:ONEOVERDELTATVALUE?
Examples
DISplay:REFFFTView5:CURSo r:ONEOVERDELTATVALUE? might
return
:DISPLAY:REFFFTVIEW5:CURSOR: ONEOVERDELTATVALUE
2.540935140340E-9
indicating the one over delta T cursor readout value is
2.54 ns.
DISplay:REFFFTView<x>:CURSor:SCREEN:AXPOSition
This command sets or queries the horizontal cursor A position of the specified
cursor in the specified view.
Group
Cursor
Syntax
DISplay:REFFFTView<x>:CUR Sor:SCREEN:AXPOSition <NR3>
DISplay:REFFFTView<x>:CUR Sor:SCREEN:AXPOSition?
Arguments
<NR3> is the horizontal cursor A position of the specified cursor in the specified
view.
2-268 MSO54, MSO56, MSO58, MSO58LP Programmer
To Next Page
Loading...
Need help?
General
