Tektronix MSO56 User Manual

Commands listed in alphabetical order
BUS:B<x>:SPI
:CLOCk:POLarity
This command sets or queries the SPI clock (SCLK) source polarity for the
specified bus. The bus is specified by x.
Conditions
Requires option SR-EMBD.
Group
Bus
Syntax
BUS:B<x>:SPI:CLOCk:POLari ty {FALL|RISE}
BUS:B<x>:SPI:CLOCk:POLari ty?
Related Commands
BUS:B<x>:SPI:CLOCk:SOUrce
Arguments
FALL sets the c lock to the falling edge of the signal.
RISE sets the clock to the rising edge of the signal.
Examples
BUS:B1:SPI:CLOCK:POLARITY FALL sets the SPI clock polarity to the falling
edge for the bus B1.
BUS:B1:SPI:CLOCK:POLARITY ? might return
:BUS:B1:SPI:CLOCK:POLARIT Y RISE, indicating that the SPI clock
polarity
for the bus B1 is set to the rising edge.
BUS:B<x>:SPI:CLOCk:SOUrce
This command sets or queries the SPI clock (SCLK) source for the specified
bus. The bus is specified by x.
Conditions
Requires option SR-EMBD.
Group
Bus
Syntax
BUS:B<x>:SPI:CLOCk:SOUrce
{CH<x>|CH<x>_D<x>|MATH<x> |REF<x>|REF<x>_D<x>}
BUS:B<x>:SPI:CLOCk:SOUrce ?
Related Commands
BUS:B<x>:SPI:CLOCk:POLarity
2-170 MSO54, MSO56, MSO58, MSO58LP Programmer

Tektronix MSO56 Specifications

General

Brand	Tektronix
Model	MSO56
Category	Test Equipment
Language	English