Tektronix MSO56 User Manual

Commands listed in alphabetical order
Examples
DISplay:GLOba
l:REF1:STATE 1
displays reference 1 .
DISplay:GLObal:REF1:STATE? might return
:DISPLAY:GLO
BAL:REF1:STATE 1
indicating that reference 1 is displayed.
DISplay:INTENSITy? (Query Only)
This query-only command returns the waveform saturation level and screen saver
settings.
Group
Display Control
Syntax
DISplay:INTENSITy?
Related Commands
Arguments
None
Examples
DISPLAY:INTENSITY? might return :DISPLAY:INTENSITY:B ACKLIGHT 1
indicating the intensity is set to 1..
DISplay:INTENSITy:BACKLight
This command sets or queries the display backlight intensity setting.
Group
Display Control
Syntax
DISplay:INTENSITy:BACKLigh t {LOW|MEDium|HIGH}
DISplay:INTENSITy:BACKLigh t?
Arguments
LOW selects a low brightness level.
MEDium sele
cts a moderate brightness level.
HIGH selects a full brightness level.
Examples
DISPLAY:INTENSITY:BACKLIGH T LOW sets the display backlight to low
brightness level.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-231

Tektronix MSO56 Specifications

General

Brand	Tektronix
Model	MSO56
Category	Test Equipment
Language	English