To Next Page

To Previous Page

Commands listed in alphabetical order

MEASUrement:M

EAS1:CLOCKRecovery:CLOCKFreq uency?

might return

:MEASUREMENT:MEAS1:CLOCKR ECOVERY:CLOCKFREQUENCY 2. 5000E+9

indicating the frequency is 2.5 GHz.

MEASUrement

:MEAS<x>:CLOCKRecovery:CLOCKMultiplier

This command sets or queries the clock multiplier used when explicit clock

recovery is used for the measurement. Measurements are speciﬁed by x.

Group

Measurement

Syntax

MEASUrement:MEAS<x>:CLOCK Recovery:CLOCKMultiplier <NR3>

MEASUrement:MEAS<x>:CLOCK Recovery:CLOCKMultiplier?

Arguments

<NR3> is the clock multiplier.

Examples

MEASUrement:MEAS1:CLOCKRe covery:CLOCKMultiplier 1. 5 sets the

clock multiplier to 1 .5.

MEASUrement:MEAS1:CLOCKRe covery:CLOCKMultiplier? might return

:MEASUREMENT:MEAS1:CLOCKR ECOVERY:CLOCKMULTIPLIER 1 .0000

indicating the clock multiplier is 1.0.

MEASUrement:MEAS<x>:CLOCKRecovery:CONSTCLOCKMODe

This command sets or queries the constant clock mode used when constant clock

recovery is used for the measurement. The measurement number is speciﬁed by x.

Group

Measurement

Syntax

MEASUrement:MEAS<x>:CLOCK Recovery:CONSTCLOCKMODe

{MEAN|MEDian|FIXed}

Arguments

MEAN speciﬁes that clock recovery uses the m ean of the clock signal as the clock

frequency.

MEDian speciﬁ es that clock recovery uses the mode of the clock signal as the

clock frequency.

FIXed speciﬁ es that clock recovery uses the value set by the user as the clock

frequency.

2-432 MSO54, MSO56, MSO58, MSO58LP Programmer

Tektronix MSO56 User Manual

Questions and Answers: