Commands listed in alphabetical order
Syntax
MATH:MATH<x>:
SPECTral:WINdow
{RECTANGular|HAMMing|HANN ing|BLACKMANHarris}
MATH:MATH<x>:SPECTral:WIN dow?
Related Commands
MATH:MATH<x>:TYPe
Arguments
RECTANGular window function is equivalent to multiplying all gate data by one.
HAMMing window function is based on a cosine series.
HANNing window function is based on a cosine series.
BLACKMANHarris window function is based on a cosine series.
Examples
MATH2:SPECTRAL:WINDOW HANNING applies a Hanning window to the spectral
analyzer input data.
MATH2:SPECTRAL:WINDOW? might return :MATH2:SPECTRAL :WINDOW
BLACKMANHarris
, indicating that the window function used to m ultiply the
spectral analyzer input data is the BLACKMANHarris function.
MATH:MATH<x>:TYPe
This command sets or queries the math type. The math waveform is specified by x.
Group
Math
Syntax
MATH:MATH<x>:TYPe {BASic|FFT|ADVanc ed}
Arguments
BASic set the type to basic math.
FFT sets the type to FFT math, which can use any live analog or refer ence
waveform in the time domain. NOTE. You can also use FFT as part of a math
expression by declaring the type
ADVanced. See examples for the command MATH:MATH<x>:DEFine.
ADVanced sets the type to advanced math.
Examples
MATH:MATH2:TYPE BASIC sets the type of Math 2 to basic.
MATH:MATH2:TYPE? might return :MATH:MATH2:T YPE FFT indicating the
type of Math 4 is currently FFT.
2-378 MSO54, MSO56, MSO58, MSO58LP Programmer
To Next Page
Loading...
Need help?
General
