Tektronix MSO56 User Manual

Commands listed in alphabetical order
Syntax
BUS:B<x>:RS23
2C:DELIMiter {NULl|CR|LF|SPace|XFF}
BUS:B<x>:RS232C:DELIMiter ?
Related Commands
BUS:B<x>:RS232C:DISplaymode
Arguments
NULl specifies NULL (0x00 ) delimiting value for a packet.
CR specifies CR (0x0D) delimiting value for a packet.
LF specifies LF (0x0A) delimiting value for a packet.
XFF specifies XFF (0xFF) delimiting value for a packet.
SPace specifies SPace delimiting value for a packet.
Examples
BUS:B1:RS232C:DELIMITER LF sets the delimiter to 0 x0A for the RS-232C
bus B1.
BUS:B1:RS232C:DELIMITER? might return : BUS:B1:RS232C:DELIMITER
NULL
, indicating that the delimiter to 0x00 for the RS-232C bus B1.
BUS:B<x>:RS232C:DISplaymode
This command set
s o r queries the RS-232C display mode for the specified bus.
The bus is specified by x.
Conditions
Requires option SR-COMP.
Group
Bus
Syntax
BUS:B<x>:RS232C:DISpl
aymode {FRame|PACKET}
BUS:B<x>:RS232C:DISplaymo de?
Related Commands
BUS:B<x>:RS232C:DELIMiter
Arguments
FRame displays each frame as a single entity.
PACKET displays a group of frames terminated with a single frame definedbythe
BUS:B<x>:RS232C:DELImiter comma nd.
Examples
BUS:B1:RS232C:DISPLAYMODE FRAME sets the display mode for the RS-232C
bus B1 to Frame.
2-166 MSO54, MSO56, MSO58, MSO58LP Programmer

Tektronix MSO56 Specifications

General

Brand	Tektronix
Model	MSO56
Category	Test Equipment
Language	English