Commands listed in alphabetical order
Group
Ethernet
Syntax
ETHERnet:PING:STATus?
Returns
OK is returned if the computer at the gateway IP address answers.
NORESPOnsE is returned if the computer at the gateway IP address does not
answer.
TRYING is returned if the ping operation is still executing.
NEVER is returned if ETH ERnet:PING EXECute has not been previously
sent, indicating that no ping response has ever been received in response to an
ETHERnet:PING EXECute command since the instrument was powered on.
ETHERnet:SUBNETMask
This command sets or queries the instrument subnet mask value.
Group
Ethernet
Syntax
ETHERnet:SUBNETMask <QString>
ETHERnet:SUBNETMask?
Related Commands
ETHERnet:NETWORKCONFig,
ETHERnet:IPADDress,
ETHERnet:GATEWay:IPADDress
Arguments
<QString> is the subnet mask value, enclosed in quotes.
Examples
ETHERNET:SUBNETMASK "255.255.255.0" sets the subnet mask value using
standard IP address notation format.
EVENT? (Query Only)
This query-only command returns an event code from the Event Queue that
provides information about the results of the last *ESR? re
ad.
EVENT? also
removes the returned value from the Event Queue.
Group
Status and Error
2-328 MSO54, MSO56, MSO58, MSO58LP Programmer
To Next Page
Loading...
Need help?
General
