Tektronix MSO56 User Manual

Commands listed in alphabetical order
Examples
DISplay:REFFF
TView5:CURSor:SCREEN:BXPOSit ion 300
sets the position
to 300 MHz.
DISplay:REFF
FTView5:CURSor:SCREEN:BXPO Sition?
might
return
:DISPLAY:REFFFTVIEW5:CURSOR :SCREEN:BXPOSITION
394.3483403001212E+6
indicating the B cursor horizontal position is 394.348
MHz.
DISplay:REFFFTView<x>:CURSor:SCREEN:BYPOSition
This command sets or queries the vertical cursor B position of the specified cursor
in the spe
cified view.
Group
Cursor
Syntax
DISplay:REFFFTView<x>:CUR Sor:SCREEN:BYPOSition <NR3>
DISplay:REFFFTView<x>:CUR Sor:SCREEN:BYPOSition?
Arguments
<NR3> is the vertical cursor B position of the specified cursor in the specified view.
Examples
DISplay:REFFFTView5:CURSo r:SCREEN:BYPOSition -80 sets the cursor
position to -90 dBm.
DISplay:REFFFTView5:CURSo r:SCREEN:BYPOSition? might return
:DISPLAY:REFFFTVIEW5:CURS OR:SCREEN:BYPOSITION -90. 0 indicating
the B cursor vert
ical position is -90 dBm.
DISplay:REFFFTView<x>:CURSor:SPLITMODE
This command sets or queries whether both cursors have same or different source.
Group
Cursor
Syntax
DISplay:REFFFTView<x>:CUR Sor:SPLITMODE {SAME|SPLIT}
DISplay:REFFFTView<x>:CUR Sor:SPLITMODE?
Arguments
SAME specifies both cursors have the same sources.
SPLIT specifies both cursors have different sources.
2-270 MSO54, MSO56, MSO58, MSO58LP Programmer

Tektronix MSO56 Specifications

General

Brand	Tektronix
Model	MSO56
Category	Test Equipment
Language	English