Commands listed in alphabetical order
0.0E+0;MODE 1;
:HORIZONTAL:POSITION 50.0000;SCALE
1.0000E-6;ACQDURATION 10.0000E-6
.
HORizontal:ACQDURATION? (Query Only)
This query returns the timebase duration.
Group
Horizontal
Syntax
HORizontal:ACQDURATION?
Returns
<NR3> returns the duration of the acquisition.
Examples
HORIZONTAL:ACQDURATION? might r eturn :HORIZONTAL:ACQDURA TION
5.0E-9
, indicating the acquisition duration is 5.0 us.
HORizontal:DELay:MODe
This command sets or queries the horizontal delay mode.
Group
Horizontal
Syntax
HORizontal:DELay:MODe {OFF|ON|<NR1>}
HORizontal:DELay:MODe?
Related Commands
HORizontal:POSition
Arguments
OFF sets the Horizontal Delay Mode to off. This causes the HORizontal:POSition
command to operate
like the HORIZONTAL POSITION knob on the front panel.
ON sets the Horizontal Delay Mode to on. This causes the
HORizontal:DELay:TIMe command to operate like the HORIZONTAL
POSITION knob on the front panel.
<NR1> = 0 sets the Horizontal Delay Mode to off; any other value sets this mode
to on.
Examples
HORIZONTAL:DELAY:MODE OFF sets the Horizontal Delay Mode to off, allowing
the horizontal position command to operate like the HORIZONTAL POSITION
knob on the front panel.
2-340 MSO54, MSO56, MSO58, MSO58LP Programmer
To Next Page
Loading...
Need help?
General
