To Next Page

To Previous Page

Commands listed in alphabetical order

BUS:B<x>:PAR

allel:ALLTHResholds:APPly (No Query Form)

This command sets all of the data source thresholds to the value set by

BUS:B<x>:PARallel:ALLTHResholds for the parallel bus. The bus is speciﬁed

by x.

Group

Bus

Syntax

BUS:B<x>:PARallel:ALLTHRe sholds:APPly

Related Commands

BUS:B<x>:PARallel:ALLTHResholds

Examples

BUS:B1:PARallel:ALLTHResh olds:APPly sets all data source thresholds to

the value set by BUS:B<x>:PARallel:ALLTHResholds.

BUS:B<x>:PARallel:BIT<n>SOUrce

This command sets or queries the speciﬁed bit source for speciﬁed parallel bus.

The bus is speciﬁed by x. The bit is speciﬁed by n and is an integer in the range of

1to64.

Group

Bus

Syntax

BUS:B<x>:PARallel:BIT<n>S OUrce

{CH<x>|CH<x>_D<x>|MATH<x> |REF<x>|REF<x>_D<x>|NONE}

Related Commands

BUS:B<x>:PARallel:BIT<n>SOUrce:THReshold

Arguments

CH<x> is the speciﬁed bit source.

CH<x>_D<x> is the speciﬁed bit source.

MATH<x> is the speciﬁed bit source.

REF<x> is the speciﬁed bit source.

REF<x>_D<x> speciﬁes a digital reference waveform as the bit<x> source

waveform for the speciﬁed parallel bus.

NONE disables the bit source.

2-160 MSO54, MSO56, MSO58, MSO58LP Programmer

Tektronix MSO56 User Manual

Questions and Answers: