Tektronix MSO56 User Manual

Commands listed in alphabetical order
Examples
SEARCH:SEARCH
1:TRIGger:A:TIMEOut:SOUrce
SEARCH:SEARCH1:TRIGger:A: TIMEOut:SOUrce?
might return
:SEARCH:SEAR
CH1:TRIGGER:A:TIMEOUT:SOUR CE CH1_D0
indicating
CH1_D0 is the source.
SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:THReshold
Sets or queries the source threshold level for a timeout trigger search to determine
where to place a mark. The search number is specified by <x>.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger: A:TIMEOut:THReshold <NR
3>
SEARCH:SEARCH<x>:TRIGger: A:TIMEOut:THReshold?
Arguments
<NR3> is the source threshold level for a timeout trigger search.
Examples
SEARCH:SEARCH1:TRIGger:A: TIMEOut:
THReshold 50.0e-3
sets the
thresholdto50.0mV.
SEARCH:SEARCH1:TRIGger:A: TIMEOu
t:THReshold?
might return
:SEARCH:SEARCH1:TRIGGER:A :TIMEOUT:THRESHOLD 0.0E+0 indicating
thethresholdis0.0V.
SEARCH:SEARCH<x>:TRIGger:A:TI
MEOut:TIMe
This command sets or queries the time setting for a timeout trigger search to
determine where to place a mark. The search number is specified by <x>.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger: A:TIMEOut:TIMe <NR3>
SEARCH:SEARCH<x>:TRIGger: A:TIMEOut:TIMe?
Arguments
<NR3> is the time in seconds.
Examples
SEARCH:SEARCH1:TRIGGER:A: TIMEOUT:TIME 400E-9 sets the timeout
trigger time setting for search 1 to 400 ns.
2-740 MSO54, MSO56, MSO58, MSO58LP Programmer

Tektronix MSO56 Specifications

General

Brand	Tektronix
Model	MSO56
Category	Test Equipment
Language	English