Tektronix MSO56 User Manual

Commands listed in alphabetical order
SEARCH:SEARCH
1:TRIGger:A:TRANsition:LOGIC QUALification?
might
return
:SEARCH:SEARCH1:TRIGGER:A: TRANSITION:LOGICQUALIFICATION
OFF
indicating logic qualification is off.
SEARCH:SEAR
CH<x>:TRIGger:A:TRANsition:POLarity
This command specifies the polarity for the transition search. The search number
is specified by <x>.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger: A:TRANsition:POLarity
{POSitive|NEGative|EITher }
SEARCH:SEARCH<x>:TRIGger: A:TRANsition:POLarity?
Arguments
EITher places a mark on a transition of either polarity.
NEGative places a mark on a transition of negative polarity.
POSitive places a mark on a transition of positive polarity.
Examples
SEARCH:SEARCH1:TRIGger:A: TRANsition:POLarity NEGAT IVE places a
mark on a transition of negative polarity.
SEARCH:SEARCH1:TRIGger:A: TRANsition:POLarity? might return
:SEARCH:SEARCH1:TRIGGER:A :TRANSITION:POLARITY POSI TIVE
indicating the polaity is positive.
SEARCH:SEARCH<x>:TRIGger:A:TRANsition:SOUrce
This command sets and queries the source for the transition search input. The
search number is specified by <x>.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger: A:TRANsition:SOUrce
{CH<x>|MATH<x>|REF<x>}
SEARCH:SEARCH<x>:TRIGger: A:TRANsition:SOUrce?
Arguments
Arguments are the available sources.
2-742 MSO54, MSO56, MSO58, MSO58LP Programmer

Tektronix MSO56 Specifications

General

Brand	Tektronix
Model	MSO56
Category	Test Equipment
Language	English