To Next Page

To Previous Page

Commands listed in alphabetical order

Syntax

MATH:MATH<x>:

SPECTral:SUPPress {OFF|ON|0|1}

MATH:MATH<x>:SPECTral:SUPP ress?

Related Commands

MATH:MATH<x>:SPECTral:TYPE

Arguments

0 disables suppression threshold for the speciﬁed math waveform.

1 enables suppression threshold for the speciﬁed math waveform.

ON enables suppression threshold for the speciﬁed math waveform.

OFF disables suppression threshold for the speciﬁed math waveform.

Examples

MATH:MATH3:SPECTRAL:SUPPRE SS ON enables the suppression threshold on

the Math 3 spectral waveform.

MATH:MATH2:SPECTRAL:SUPPRE SS? might return

:MATH:MATH2:SPECTRAL:SUPPR ESS 0 indicating the suppression threshold is

disabled on the Math 2 spectral waveform.

MATH:MAT H<x>:SPECTral:SUPPress:VALue

This command sets or queries in volts the value of suppression threshold of the

speciﬁed math waveform. This requires the Spectral type to be Phase and the

Suppression to be enabled for this PI command to have any affect. The math

waveform is speciﬁed by x.

Group

Math

Syntax

MATH:MATH<x>:SPECTral:SUPP ress:VALue <NR3>

MATH:MATH<x>:SPECTral:SUPP ress:VALue?

Related Commands

MATH:MATH<x>:SPECTral:TYPE, MATH:MATH<x>:SPECTral:SUPPress

Arguments

<NR3> is the value of suppression threshold of the speciﬁed math waveform in

volts.

Examples

MATH:MATH3:SPECTRAL:SUPPRE SS:VALUE 100.0E-3 sets the suppression

thresholdofMath3to100mV.

MATH:MATH1:SPECTRAL:SUPPRE SS:VALUE? might return

MATH:MATH1:SPECTRAL:SUPPRE SS:VALUE 10.0000E+3 indicating

the suppression threshold of Math 1 is currently set to 10 kV.

MSO54, MSO56, MSO58, MSO58LP Programmer 2-375

Tektronix MSO56 User Manual

Questions and Answers: