Commands listed in alphabetical order
MEASUrement:
MEAS<x>:RESUlts:CURRentacq:PK2PK? (Query Only)
This query-only command returns the peak-to-peak value for the specified
measurement for the current acquisition. The measurement number is specified
by x.
Group
Measurement
Syntax
MEASUrement:MEAS<x>:RESUl ts:CURRentacq:PK2PK?
Returns
The peak-
to-peak value for the specified measurement.
Examples
MEASUrement:MEAS1:RESUlts :CURRentacq:PK2PK? might return
:MEASUREMENT:MEAS1:RESULT S:CURRENTACQ:PK2PK 0.0E+0 indicating
the pe ak-to-peak value for the specified measurement for the current acquisition
is 0.0 V.
MEASUrement:MEAS<x>:RESUlts:CURRentacq:POPUlation? (Query Only)
This query-only command returns the population for the specified measurement
for the current acquisition. The measurement number is specified by x.
Group
Measurement
Syntax
MEASUrement:MEAS<x>:RESUl ts:CURRentacq:POPUlation?
Returns
The population m easurement value for the specified measurement.
Examples
MEASUrement:MEAS<x>:RESUl ts:CURRentacq:POPUlation? might return
:MEASUREMENT:MEAS1:RESULT S:CURRENTACQ:POPULATION
1
indicating the
population for the current measurement is 1 measurement.
MEASUrement:MEAS<x>:RESUlts:CURRentacq:STDDev? (Query Only)
This query-only command returns the standard deviation for the specified
measurement for all acquisitions accumulated since statistics were last reset. The
measurement number is specified by x.
Group
Measurement
2-484 MSO54, MSO56, MSO58, MSO58LP Programmer
To Next Page