Tektronix MSO56 User Manual

Commands listed in alphabetical order
Examples
REF:REF1:SOUr
ce
"/home/guest/.local/share /Tektronix/TekScope/
FirstRecalledSession/1610 12_132000_000.wfm"
sets the source of
the reference.
REF:REF1:SOUrce? might return :REF: REF1:SOURCE
"/home/guest/.local/share /Tektronix/TekScope/
LastRecalledSession/16101 2_132039_000.wfm"
.
REF<x>_DALL:LABel:COLor
This comm
and sets or queries the color of the specified digital group. The
reference is specified by x.
Group
Digital
Syntax
REF<x>_DALL:LABel:COLor <QString>
Arguments
<QString> is the color of the digital grou
plabel.Toreturnthecolortothedefault
color, send an empty string as in this example:
:REF5_DALL:LABEL:COLOR "".
Examples
REF1_DALL:LABel:COLor "#FF0000" sets the font color to red.
REF1_DALL:LABel:COLor? might return :REF1_DALL:LABEL:COLOR
"#FFFF00"
indicating the font color is yellow.
REF<x>_DALL:LABel:FONT:BOLD
This command sets or queries the bold state of the specified digital group. The
reference is specified by x.
Group
Digital
Syntax
REF<x>_DALL:LABel:FONT:BO LD {ON|OFF|<NR1>}
Arguments
OFF argument turns off bold font.
ON argument turns on bold font.
<NR1> = 0 turns off bold font; any other value turns on bold font.
2-606 MSO54, MSO56, MSO58, MSO58LP Programmer

Tektronix MSO56 Specifications

General

Brand	Tektronix
Model	MSO56
Category	Test Equipment
Language	English