Commands listed in alphabetical order
SAVe:WAVEfor
m:SOURCELIst? (Query Only)
This query returns a list of the available waveforms that can be specified as the
source for the SAVe:WAVEform command. Source waveforms must have their
display m ode
set to On t o a ppear in this list and to be saved.
Group
Save and Recall
Syntax
SAVe:WAVEform:SOURCELIst?
Examples
SAVE:WAVEFORM:SOURCELIST? might return
ALL,CH1_DALL,CH2,CH3,CH8,M ATH1,MATH2,REF2,REF4.
SAVEON:FILE:DEST
This command sets or queries the location where files are saved when
SAVEON:TRIGGER is ON and SAVEON:WAVEFORM is ON. You can save the
files to a local drive or network path by entering the desired location in <QString>.
You can also select to save the files to a USB drive.
Group
Save On
Syntax
SAVEON:FILE:DEST <QString>
SAVEON:FILE:DEST?
Related Commands
SAVEON:FILE:NAME
Arguments
<QString> specifies the location to store files.
Examples
SAVEON:FILE:DEST
”C:\users\username\Tektron ix\TekScope\SaveOnTrigger”
sets this
as the location to s ave files(namedbythe
SAVEON:FILE:NAME
command), when there is a trigger.
SAVEON:FILE:DEST? might return :SAVEON:FI LE:DEST
”C:\users\username\Tektron ix\TekScope\SaveOnEvent”
,
indicating the drive location where files will be saved when there is a trigger.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-623
To Next Page
Loading...
Need help?
General
