Tektronix MSO56 User Manual

Commands listed in alphabetical order
Examples
DISplay:REFFF
TView5:CURSor:SCREEN:AXPOSit ion 1.0E+6
sets the
cursor position to 1.0 MHz.
DISplay:REFF
FTView5:CURSor:SCREEN:AXPO Sition?
might
return
:DISPLAY:REFFFTVIEW5:CURSOR :SCREEN:AXPOSITION
792.4465962305570E+3
indicating the A cursor horizontal position is 792.447
kHz.
DISplay:REFFFTView<x>:CURSor:SCREEN:AYPOSition
This command sets or queries the vertical cursor A position of the specified cursor
in the spe
cified view.
Group
Cursor
Syntax
DISplay:REFFFTView<x>:CURS or:SCREEN:AYPOSition <NR3>
DISplay:REFFFTView<x>:CURS or:SCREEN:AYPOSition?
Arguments
<NR3> is the vertical cursor A position of the specified cursor in the spec ified view.
Examples
DISplay:REFFFTView5:CURSor :SCREEN:AYPOSition -20.9 sets the
position to -20 dBm.
DISplay:REFFFTView5:CURSor :SCREEN:AYPOSition? might
return
:DISPLAY:REFFFTVIEW5:CURSOR :SCREEN:AYPOSITION
-30.0132603262431
indicating the A cursor vertical position is -30.01 dBm.
DISplay:REFFFTView<x>:CURSor:SCREEN:BXPOSition
This command sets or queries the horizontal cursor B position of the specified
cursor in the specified view.
Group
Cursor
Syntax
DISplay:REFFFTView<x>:CURS or:SCREEN:BXPOSition <NR3>
DISplay:REFFFTView<x>:CURS or:SCREEN:BXPOSition?
Arguments
<NR3> is the horizontal cursor B position of the specified cursor in the specified
view.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-269

Tektronix MSO56 Specifications

General

Brand	Tektronix
Model	MSO56
Category	Test Equipment
Language	English