Tektronix MSO56 User Manual

Commands listed in alphabetical order
Examples
MEASUrement:E
DGE2
MEASUrement:EDGE2? might return :MEASUREMENT:EDGE2 BOTH
indicating
MEASUremen
t:EYERENDER
This command sets or queries the state of high-performance eye rendering for an
eye diagram.
Group
Measurement
Syntax
MEASUrement:EYERENDER {<NR1>|OFF|ON}
MEASUrement:EYERENDER?
Arguments
<NR1> = 0 disables high-performance eye rendering for an eye diagram; any
other value turns this feature on.
OFF disables high-performance eye rendering for an e ye diagram.
ON enables h igh-performance eye rendering for an eye diagram.
Examples
MEASUREMENT:EYERENDER
MEASUREMENT:EYERENDER
? might return :MEASUREMENT:E YERENDER 1
indicating high-performance eye r endering is on.
MEASUrement:FILTers:BLANKingtime
This command sets or queries the global filter blanking time.
Group
Measurement
Syntax
MEASUrement:FILTers:BLANK ingtime <NR3>
MEASUrement:FILTers:BLANK ingtime?
Arguments
<NR3> is the current filter blanking time.
2-402 MSO54, MSO56, MSO58, MSO58LP Programmer

Tektronix MSO56 Specifications

General

Brand	Tektronix
Model	MSO56
Category	Test Equipment
Language	English