Commands listed in alphabetical order
Arguments
<NR3> is the top
value of the zoom y-axis in the specified plot view.
Examples
DISplay:REFFFTView5:ZOOM:Y AXIS:TO 0.0 sets the top value of the zoom
y-axis to 0.0 dBm.
DISplay:REFFFTView5:ZOOM:Y AXIS:TO? might return
:DISPLAY:REFFFTVIEW5:ZOOM: YAXIS:TO 15.8820685863495
indicating the top value of the zoom y-axis is 15.9 dBm.
DISplay:SELect:BUS
This command sets or queries the overall selected bus. Sets are applied to all views
that contain the source and the selected view is changed. When multiple buses are
open, querying the command gives the correct result, but the bus cannot set.
Group
Display Control
Syntax
DISplay:SELect:BUS BUS<x>
DISplay:SELect:BUS?
Arguments
BUS<x> is the selected bus.
Examples
DISplay:SELect:BUS Bus2 selects Bus 2 as the selected bus.
DISplay:SELect:BUS? might return :DISPLAY:SELECT:BUS BUS1
indicating Bus 1 is the selected bus.
DISplay:SELect:MATH
This command sets or queries the overall selected math. Sets are applied to all
views that contain the source and the selected view is changed. When multiple
Math are open, querying the command gives the correct result, but the required
Math cannot be set.
Group
Display Control
Syntax
DISplay:SELect:MATH MATH<x>
DISplay:SELect:MATH?
Arguments
MATH<x> is the selected math.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-279
To Next Page
Loading...
Need help?
General
