Commands listed in alphabetical order
MATH:MATH<x>
:LABel:XPOS
This command sets or queries the X position of the specified math label. Maths
are specified by x.
Group
Math
Syntax
MATH:MATH<x>:LABel:XPOS <NR1>
MATH:MATH<x>:LABel:XPOS?
Related Commands
MATH:MATH<x>:LABel:YPOS
Arguments
<NR1> is the location (in pixels) where the label for the s elected math waveform
is displayed, relative to the left edge of the display.
Examples
MATH:MATH2:LABEL:XPOS 5 moves the waveform label for the Math 2
waveform so that it begins 5 pixels to the right of the left edge of the screen.
MATH:MATH2:LABEL:XPOS? might return :MATH:MATH2:LABEL:XPOS 2.5,
indicating that the waveform label for the Math 2 waveform is currently 2.5 pixels
to the right of the left edge of the display.
MATH:MATH<x>:LABel:YPOS
This command sets or queries the y-position of the specified math label. The
Math waveform is specified by x.
Group
Math
Syntax
MATH:MATH<x>:LABel:YPOS <NR1>
MATH:MATH<x>:LABel:YPOS?
Related Commands
MATH:MATH<x>:LABel:XPOS
Arguments
<NR1> is the location (in pixels) where the label for the s elected math waveform
is displayed, relative to the baseline of the waveform.
Examples
MATH:MATH2:LABEL:YPOS -2.5 moves the waveform label for the Math 2
waveform to 2.5 pixels below the baseline of the waveform.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-371
To Next Page
Loading...
Need help?
General
