Tektronix MSO56 User Manual

Commands listed in alphabetical order
Examples
MEASUrement:M
EAS1:FROMEDGESEARCHDIRect BACKWard
specifies a
backward search from the edge.
MEASUrement:
MEAS1:FROMEDGESEARCHDIRect ?
might return
:MEASUREMENT:MEAS1:FROMED GESEARCHDIRECT FORWARD indicating a
forward search from the edge.
MEASUremen
t:MEAS<x>:GATing
This command sets or queries the gating type for the measurement. Measurements
are specified by x.
Group
Measurement
Syntax
MEASUrement:MEAS<x>:GATin g {NONE|SCREEN|CURSor|LOGic| SEARch}
MEASUrement:MEAS<x>:GATin g?
Arguments
NONE specifies measurements are taken across the entire record.
SCREEN turns o n gating, using the left and right edges of the screen.
CURSor limits measurements to the portion of the waveform between the vertical
bar cursors, even if they are off screen.
LOGic specifies that measurements are taken only when the logical state of other
waveforms is true.
SEARch specifies that measurements are taken only where the res ults of a user
specified search are found.
Examples
MEASUrement:MEAS1:GATing CURSOR limits measurements to the portion of
the waveform between the vertical bar cursor.
MEASUrement:MEAS1:GATing? might return : MEASUREMENT:MEAS1:GATING
NONE
indicating measurements are taken across the entire record.
MEASUrement:MEAS<x>:GATing:ACTive
This command sets or queries the gating active level when the gating type is
logic. Measurementsarespecified by x.
Group
Measurement
2-452 MSO54, MSO56, MSO58, MSO58LP Programmer

Tektronix MSO56 Specifications

General

Brand	Tektronix
Model	MSO56
Category	Test Equipment
Language	English