Tektronix MSO56 User Manual

Commands listed in alphabetical order
Arguments
POSitive speci
fies positive polarity for a pulse width search.
NEGative specifies negative polarity for a pulse width search.
Examples
SEARCH:SEARCH1:TRIGger:A:P ULSEWidth:POLarity NEGATI VE sets the
polarity to negative.
SEARCH:SEARCH1:TRIGger:A:P ULSEWidth:POLarity? might return
:SEARCH:SEARCH1:TRIGGER:A: PULSEWIDTH:POLARITY POSIT IVE
indicating the polarity is positive.
SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:SOUrce
This command sets and queries the source for the pulse width search input. The
search number is specified by <x>.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger:A :PULSEWidth:SOUrce
{CH<x>|CH<x>_D<x>|REF<x>|R EF<x>_D<x>}
SEARCH:SEARCH<x>:TRIGger:A :PULSEWidth:SOUrce?
Arguments
Arguments are possible sources.
Examples
SEARCH:SEARCH1:TRIGger:A:P ULSEWidth:SOUrce CH1 sets the source
to channel 1.
SEARCH:SEARCH1:TRIGger:A:P ULSEWidth:SOUrce? might return
:SEARCH:SEARCH1:TRIGGER:A: PULSEWIDTH:SOURCE CH2 indicating
channel 2 is the source.
SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:THReshold
Sets or queries the source threshold level for a pulse width trigger search to
determine where to place a mark. The search number is specified by <x>.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIG
ger:A:PULSEWidth:THReshold <NR3>
SEARCH:SEARCH<x>:TRIGger:A :PULSEWidth:THReshold?
MSO54, MSO56, MSO58, MSO58LP Programmer 2-725

Tektronix MSO56 Specifications

General

Brand	Tektronix
Model	MSO56
Category	Test Equipment
Language	English