Tektronix MSO56 - DISplay:WAVEView<x>:CURSor:CURSOR<x>:WAVEform:APOSition; DISplay:WAVEView<x>:CURSor:CURSOR<x>:WAVEform:BPOSition

Commands listed in alphabetical order
Examples
DISplay:WAVEV
iew1:CURSor:CURSOR1:VBArs:UN Its?
might return
:DISPLAY:WAVEVIEW1:CURSOR :CURSOR1:VBARS:UNITS "s" indicating
the cursor units are seconds.
DISplay:WAV
EView<x>:CURSor:CURSOR<x>:WAVEform:APOSition
This command sets or queries the horizontal cursor A position of the specified
cursor in the specified waveview.
NOTE.
WAVE
View<x>
is the specified waveview and must be WAVEView1 .
Cursor<x> is the specified cursor and must be CURSOR1 .
Group
Cursor
Syntax
DISplay:WAVEView<x>:CURSo r:CURSOR<x>:WAVEform:APOSition
<NR3>
DISplay:WAVEView<x>:CURSo r:CURSOR<x>:WAVEform:APOSition?
Arguments
<NR3> is the horizontal cursor A position of the specified cursor in the specified
waveview.
Examples
DISplay:WAVEView1:CURSor: CURSOR1:WAVEform:APOSition 1.5e-6
sets the position to 1.5 μs.
DISplay:WAVEView1:CURSor: CURSOR1:WAVEform:APOSition? might
return
:DISPLAY:WAVEVIEW1:CURSOR:CU RSOR1:WAVEFORM:APOSITION
-1.2667480236557E-6
indicating the position is 1.27 μs.
DISplay:WAVEView<x>:CURSor:CURSOR<x>:WAVEform:BPOSition
This command sets or queries the horizontal cursor B position of the specified
cursor in the specified waveview.
NOTE.
WAVEView<x> is the specified waveview and must be WAVEView1 .
Cursor<x> is the specified cursor and must be CURSOR1 .
Group
Cursor
Syntax
DISplay:WAVEView<x>:CURSo r:CURSOR<x>:WAVEform:BPOSition
<NR3>
2-300 MSO54, MSO56, MSO58, MSO58LP Programmer