YASKAWA Sigma-7 SGD7S Series - Page 720

Param-
eter No.
Size Name Setting
Range
Setting
Unit
Default
Setting
Appli-
cable
Motors
When
Enabled
Classifi-
cation
Refer-
ence
Pn52A 2 Multiplier per
Fully-closed
Rotation
0 to 100 1% 20 Rotary Immedi-
ately
Setup
Ä Chap.
11.4.8
‘Alarm
Detection
Settings’
page 461
Param-
eter No.
Size Name Setting
Range
Setting
Unit
Default
Setting
Appli-
cable
Motors
When
Enabled
Classifi-
cation
Refer-
ence
Pn52B 2 Overload
Warning
Level
1 to 100 1% 20 All Immedi-
ately
Setup
Ä Chap.
6.14.2
‘Detection
Timing for
Overload
Warnings
(A.910)’
page 176
Param-
eter No.
Size Name Setting
Range
Setting
Unit
Default
Setting
Appli-
cable
Motors
When
Enabled
Classifi-
cation
Refer-
ence
Pn52C 2 Base Current
Derating at
Motor Over-
load Detec-
tion
10 to 100 1% 100 All After
restart
Setup
Ä Chap.
6.14.2
‘Detection
Timing for
Overload
Warnings
(A.910)’
page 176
Param-
eter No.
Size Name Setting
Range
Setting
Unit
Default
Setting
Appli-
cable
Motors
When
Enabled
Classifi-
cation
Refer-
ence
Pn530 2 Program Jog-
ging- Related
Selections
0000h to
0005h
– 0000h All Immedi-
ately
Setup
Ä Chap.
8.7.2 ‘Pro-
gram Jog-
ging’
page 277
n.X
Program Jogging Operation Pattern
0 (Waiting time in Pn535 → Forward by travel distance in Pn531) ×
Number of movements in Pn536
1 (Waiting time in Pn535 → Reverse by travel distance in Pn531) ×
Number of movements in Pn536
Sigma-7 Series SERVOPACKs
Parameter and Object Lists
List of Parameters > List of Parameters
| | PROFINET Communications - SIEP YEUOC7P 02A Revision 0 | en | 720