Zebra DS9908 Product Reference Guide

Symbologies
124
Code 128 Security Level 751 F1h EFh Security Level 1 154
Code 128 Reduced Quiet Zone 1208 F8h 04h B8h Disable 155
Code 39
Code 39 0 00h Enable 155
Trioptic Code 39 13 0Dh Disable 156
Convert Code 39 to Code 32
(Italian Pharmacy Code)
86 56h Disable 156
Code 32 Prefix 231 E7h Disable 157
Set Length(s) for Code 39 18, 19 12h, 13h 1 to 55 157
Code 39 Check Digit Verification 48 30h Disable 159
Transmit Code 39 Check Digit 43 2Bh Disable 159
Code 39 Full ASCII Conversion 17 11h Disable 160
Code 39 Security Level 750 F1h EEh Security Level 1 161
Code 39 Reduced Quiet Zone 1209 F8h 04h B9h Disable 162
Code 93
Code 93 9 09h Enable 162
Set Length(s) for Code 93 26, 27 1Ah, 1Bh 1 to 55 163
Code 11
Code 11 10 0Ah Disable 165
Set Lengths for Code 11 28, 29 1Ch, 1Dh 4 to 55 165
Code 11 Check Digit Verification 52 34h Disable 167
Transmit Code 11 Check Digit(s) 47 2Fh Disable 168
Interleaved 2 of 5 (ITF)
Interleaved 2 of 5 (ITF) 6 06h Enable 168
Set Lengths for I 2 of 5 22, 23 16h, 17h 6 to 55 169
I 2 of 5 Check Digit Verification 49 31h Disable 170
Transmit I 2 of 5 Check Digit 44 2Ch Disable 171
Convert I 2 of 5 to EAN 13 82 52h Disable 171
Febraban 1750 F8h 06h D6h Disable
172
Table 13 Symbology Parameter Defaults (Continued)
Parameter
Parameter
Number
1
SSI Number
2
Default
Page
Number
1. Parameter number decimal values are used for programming via RSM commands.
2. SSI number hex values are used for programming via SSI commands.

Zebra DS9908 Specifications

General

Sealing	IP52
Scan Technology	Array Imager
Scan Rate	Up to 240 in./610 cm per second
Humidity	5% to 95% RH, non-condensing
Decode Capability	1D, 2D
Connectivity	USB, RS-232, Keyboard Wedge
Image Sensor	1280 x 800
Drop Specification	Multiple 5 ft./1.5 m drops to concrete
Operating Temperature	14°F to 122°F (-10°C to 50°C)
Light Source	LED
Storage Temperature	-40°F to 158°F (-40°C to 70°C)