Zebra DS9908

Symbologies
125
I 2 of 5 Security Level 1121 F8h 04h 61h Security Level 1 173
I 2 of 5 Reduced Quiet Zone 1210 F8h 04h BAh Disable 174
Discrete 2 of 5 (DTF)
Discrete 2 of 5 5 05h Disable 174
Set Length(s) for D 2 of 5 20, 21 14h 15h 1 to 55 175
Codabar (NW - 7)
Codabar 7 07h Enable 177
Set Lengths for Codabar 24, 25 18h, 19h 4 to 55 177
CLSI Editing 54 36h Disable 179
NOTIS Editing 55 37h Disable 179
Codabar Security Level 1776 F8h 06h F0h Security Level 1 180
Codabar Upper or Lower Case Start/
Stop Characters Detection
855 F2h 57h Upper Case 181
Codabar Mod 16 Check Digit Verification 1784 F8h 06h F8h Disable 181
Transmit Codabar Check Digit 704 F1h C0h Disable 182
MSI
MSI 11 0Bh Disable 182
Set Length(s) for MSI 30, 31 1Eh, 1Fh 4 to 55 183
MSI Check Digits 50 32h One MSI Check
Digit
185
Transmit MSI Check Digit 46 2Eh Disable 185
MSI Check Digit Algorithm 51 33h Mod 10/Mod 10 186
MSI Reduced Quiet Zone 1392 F8h 05h 70h Disable 186
Chinese 2 of 5
Chinese 2 of 5 408 F0h 98h Disable 187
Matrix 2 of 5
Matrix 2 of 5 618 F1h 6Ah Disable 187
Matrix 2 of 5 Lengths 619
620
F1h 6Bh
F1h 6Ch
4 to 55 188
Matrix 2 of 5 Check Digit 622 F1h 6Eh Disable 190
Table 13 Symbology Parameter Defaults (Continued)
Parameter
Parameter
Number
1
SSI Number
2
Default
Page
Number
1. Parameter number decimal values are used for programming via RSM commands.
2. SSI number hex values are used for programming via SSI commands.