Zebra DS9908 Product Reference Guide

Parameter Defaults
415
UPC/EAN/JAN Supplemental
Redundancy
80 50h 10 138
Decode UPC/EAN/JAN
Supplemental
AIM ID
672 F1h A0h Combined 139
Transmit UPC-A Check Digit 40 28h Enable 140
Transmit UPC-E Check Digit 41 29h Enable 140
Transmit UPC-E1 Check Digit 42 2Ah Enable
141
UPC-A Preamble 34 22h System Character 142
UPC-E Preamble 35 23h System Character 143
UPC-E1 Preamble 36 24h System Character 144
Convert UPC-E to UPC-A 37 25h Disable 145
Convert UPC-E1 to UPC-A 38 26h Disable
145
EAN/JAN Zero Extend 39 27h Disable 146
UCC Coupon Extended Code 85 55h Disable 146
Coupon Report 730 F1h DAh New Coupon Format 147
UPC Reduced Quiet Zone 1289 F8h 05h 09h Disable 148
Code 128
Code 128 8 08h Enable
148
Set Length(s) for Code 128 209, 210 D1h, D2h Any Length 149
GS1-128 (formerly UCC/EAN-128) 14 0Eh Enable 150
ISBT 128 84 54h Enable
151
ISBT Concatenation 577 F1h 41h Disable - SR/DL models
Enable - HD/HL models
151
Check ISBT Table 578 F1h 42h Enable 152
ISBT Concatenation Redundancy 223 DFh 10 153
Code 128 <FNC4> 1254 F8h 04h E6h Honor 153
Code 128 Security Level 751 F1h EFh Security Level 1
154
Code 128 Reduced Quiet Zone 1208 F8h 04h B8h Disable 155
Table 29 Parameter Defaults (Continued)
Parameter
Parameter
Number
1
SSI
Number
2
Default
Page
Number
1. Parameter number decimal values are used for programming via RSM commands.
2. SSI number hex values are used for programming via SSI commands.

Zebra DS9908 Specifications

General

Sealing	IP52
Scan Technology	Array Imager
Scan Rate	Up to 240 in./610 cm per second
Humidity	5% to 95% RH, non-condensing
Decode Capability	1D, 2D
Connectivity	USB, RS-232, Keyboard Wedge
Image Sensor	1280 x 800
Drop Specification	Multiple 5 ft./1.5 m drops to concrete
Operating Temperature	14°F to 122°F (-10°C to 50°C)
Light Source	LED
Storage Temperature	-40°F to 158°F (-40°C to 70°C)