Zebra DS9908 Product Reference Guide

Parameter Defaults
417
I 2 of 5 Reduced Quiet Zone 1210 F8h 04h BAh Disable 174
Discrete 2 of 5 (DTF)
Discrete 2 of 5 5 05h Disable
174
Set Length(s) for D 2 of 5 20, 21 14h 15h 1 to 55 175
Codabar (NW - 7)
Codabar 7 07h Enable
177
Set Lengths for Codabar 24, 25 18h, 19h 4 to 55 177
CLSI Editing 54 36h Disable 179
NOTIS Editing 55 37h Disable 179
Codabar Security Level 1776 F8h 06h F0h Security Level 1 180
Codabar Upper or Lower Case
Start/
Stop Characters Detection
855 F2h 57h Upper Case 181
Codabar Mod 16 Check Digit
Verification
1784 F8h 06h F8h Disable 181
Transmit Codabar Check Digit 704 F1h C0h Disable
182
MSI
MSI 11 0Bh Disable
182
Set Length(s) for MSI 30, 31 1Eh, 1Fh 4 to 55 183
MSI Check Digits 50 32h One MSI Check Digit
185
Transmit MSI Check Digit 46 2Eh Disable 185
MSI Check Digit Algorithm 51 33h Mod 10/Mod 10 186
MSI Reduced Quiet Zone 1392 F8h 05h 70h Disable 186
Chinese 2 of 5
Chinese 2 of 5 408 F0h 98h Disable
187
Matrix 2 of 5
Matrix 2 of 5 618 F1h 6Ah Disable
187
Matrix 2 of 5 Lengths 619
620
F1h 6Bh
F1h 6Ch
4 to 55 188
Table 29 Parameter Defaults (Continued)
Parameter
Parameter
Number
1
SSI
Number
2
Default
Page
Number
1. Parameter number decimal values are used for programming via RSM commands.
2. SSI number hex values are used for programming via SSI commands.

Zebra DS9908 Specifications

General

Sealing	IP52
Scan Technology	Array Imager
Scan Rate	Up to 240 in./610 cm per second
Humidity	5% to 95% RH, non-condensing
Decode Capability	1D, 2D
Connectivity	USB, RS-232, Keyboard Wedge
Image Sensor	1280 x 800
Drop Specification	Multiple 5 ft./1.5 m drops to concrete
Operating Temperature	14°F to 122°F (-10°C to 50°C)
Light Source	LED
Storage Temperature	-40°F to 158°F (-40°C to 70°C)