Zebra DS9908

Parameter Defaults
424
IDC Width 598 F1h 56h 0300 346
IDC Height 599 F1h 57h 0050
IDC Aspect 595 F1h 53h 000 347
IDC File Format Selector 601 F1h 59h JPEG
IDC Bits Per Pixel 602 F1h 5Ah 8 BPP 348
IDC JPEG Quality 603 F1h 5Bh 065
IDC Find Box Outline 727 F1h D7h Disable
IDC Minimum Text Length 656 F1h 90h 00 350
IDC Maximum Text Length 657 F1h 91h 00
IDC Captured Image Brighten 654 F1h 8Eh Enable
IDC Captured Image Sharpen 658 F1h 92h Enable 351
IDC Border Type 829 F2h 3Dh None 352
IDC Delay Time 830 F2h 3Eh 000 353
IDC Zoom Limit 651 F1h 8Bh 000
IDC Maximum Rotation 652 F1h 8Ch 00 354
Digimarc Digital Watermarks
Digimarc Digital Watermarks/DW 1687 F8h 06h 97h Disable 359
DL Parsing Parameters
Driver’s License Parsing N/A N/A No Driver’s License Parsing 363
Parsing Driver’s License Data
Fields
N/A N/A N/A 364
Driver’s License Parse Field
Barcodes
N/A N/A N/A 365
AAMVA Parse Field Barcodes N/A N/A N/A 367
Parser Version ID Barcode N/A N/A N/A 376
Set Default Parameter N/A N/A N/A 377
Output Gender as M or F N/A N/A N/A 377
Date Format N/A N/A CCYYMMDD 378
No Separator N/A N/A N/A 379
Table 29 Parameter Defaults (Continued)
Parameter
Parameter
Number
1
SSI
Number
2
Default
Page
Number
1. Parameter number decimal values are used for programming via RSM commands.
2. SSI number hex values are used for programming via SSI commands.