CAPINTEC, INC. CAPTUS
®
4000e
15-14 CUSTOM PROTOCOLS December 15
Figure 15-16
To stop the counting midway and begin counting again, select the Re-Measure button or
press Alt+R.
To stop the counting midway and save collected data and move to the next step, select the
Stop and Save button or press Alt+S.
To stop the counting midway and quit without saving, select the Cancel button or press
Alt+C.
After count collection is done, the screen appears as shown in Figure 15-17.
Figure 15-17
To accept the measurements and continue with the next step, select the Yes button or press
the Y key. To discard and recount the current measurement, select the No button or press
the N key.
To Next Page
Loading...