AlterPath ACS Installation, Administration, and User’s Guide 73
Common Tasks for ACS Administrators
Common Tasks for ACS Administrators
The following table shows some of the common tasks that are performed by
an administrator and links to the process and procedure for performing the
task.
Table 4-1: Administrator > Common Administrative Tasks
Task Where Documented
Set up users and groups to access
connected devices.
“Users and Groups” on page 218
Set up user authentication to access
serial ports.
“Access” on page 269
Configure serial ports for power
management.
“To Configure a Power Management Protocol
for an IPDU” on page 264
Assign users permissions to manage
outlets on connected AlterPath PMs.
“To Configure Users to Manage Power Outlets
on IPDUs” on page 134
Set up local or remote data buffering,
and specify alarms for one or more serial
ports.
“To Configure Data Buffering for Serial Ports”
on page 277
“To Choose a Method for Sending
Notifications for Serial Port Data Buffering
Events” on page 307
Set up logging of system messages to a
syslog server.
“To Specify Names, Alarms, Syslogging, and
Over Current Protection for IPDUs” on page
136
“To Configure Syslogging for Serial Ports and
Specify Message Filtering” on page 165“
Configure devices for IPMI power
management.
“IPMI Power Management” on page 145
Select an authentication method for
accessing connected devices.
“Authentication” on page 224
Configure packet filtering. “Firewall Configuration” on page 194
To Next Page
Loading...
