Web Manager for Administrators
76
The following table illustrates the information that displays in the upper right
corner of all Web Manager forms.
Logging Into the Web Manager
The following procedure describes the login process to the Web Manager, and
what should be expected the first time you login to ACS.
TTo Log Into the Web Manager
1 To bring up the Web Manager, enter the IP address of the ACS in the address
field of your browser. For example, http://192.168.48.11
Note: Devices such as ACS are usually assigned a static IP addresses. If DHCP is
enabled, you must find out the dynamically-assigned IP address each time you
need to run the Web Manager. Finding a dynamically-assigned IP address
requires making an inquiry to the DHCP server using the MAC address (a 12-
digit hexadecimal number, which is on a label on ACS). Check with the
system administrator who configured the basic network parameters on the
assigned IP address. If there is no DHCP server, use the default static IP
address 192.168.160.10 that is pre-configured in the ACS.
a. If DHCP is disabled, use a static IP address assigned by the administrator.
b. If DHCP is enabled, enter the dynamically-assigned IP address.
The Login page appears.
Table 4-4: Administrator > Logout Button and Other Information in the Upper Right
Form Area Purpose
Click this button to log out.
Displays the hostname, IP address assigned during initial
configuration, and the model number of the AlterPath ACS.
To Next Page
Loading...
