Safety, Regulatory, and Compliance Information
334
DC version. Minimum Breaker Rating: 2A. Required conductor size: 18
AWG.
NEBS Certification
The AlterPath ACS16 and ACS32 DC-powered models are NEBS Level 3
certified, and are tested to meet all the requirements and objectives described
in Telecordia documents GR-63-CORE: Physical Protection, which identifies
the spatial and environmental criteria, and GR-1089-CORE: Electromagnetic
Compatibility and Electrical Safety requirements.
Note: Use shielded cables when connecting devices to the console and the serial
ports to comply with NEBS certification requirements.
Caution: Observe all central office safety precautions when connecting and
disconnecting the AlterPath ACS power supplies from the DC power source.
To comply with NEBS requirements, ensure that your site adheres to the
environmental criteria described in the NEBS specifications.
Working inside the AlterPath ACS
Do not attempt to service the ACS yourself, except when following
instructions from Cyclades Technical Support personnel. In the latter case,
first take the following precautions:
1. Turn the ACS off.
2. Ground yourself by touching an unpainted metal surface on the back of
the equipment before touching anything inside the unit.
To Next Page
Loading...
