Administration Menu & Forms
302
System Information
Selecting Administration > System information in Expert mode brings up the
following information form.
Boot Configuration
Configure ACS to boot
from its
internal firmware or from the
network.
This section defines the settings for
loading the operating system in the
event that the ACS fails to boot
successfully. ACS can boot from its
internal firmware or from the
network.
Page 317
Backup Config
Configure an FTP server to save
and retrieve your ACS
configuration, or choose a storage
device to store your configuration.
Page 320
Upgrade Firmware
Upload or upgrade to a new
firmware.
Page 323
Reboot
Reboot the ACS. Page 326
Online Help
Configure a path to a local server
for storing the online help files.
Page 327
Menu Selection Use this menu to: Where Documented
To Next Page
Loading...
