Configuring the ACS in Expert Mode
114
Description of Forms in Expert Mode
The following table briefly describes the functionality of each menu and the
related forms. For detailed procedures refer to the page where documented for
each section.
Table 6-2: Expert > Applications
Form Use This Form To: Where
Documented
Connect
Connect to the ACS shell through a secure
SSH session, or connect to a specific serial
port.
Chapter 7, Page 122
IPDU Power Mgmt.
Manage power outlets on the AlterPath
PM family of Intelligent Power
Distribution Units. From here you may
power remote machines on and off, check
the status and lock the power outlet in the
on or off state to prevent accidental
changes.
Chapter 7, Page 126
IPDU Multi-Outlet
Ctrl
Manage all power outlets of a multi-outlet
device connected to the AlterPath PM
family of Intelligent Power Distribution
Units in one single operation.
Chapter 7, Page 139
IPMI Power Mgmt.
Manage IPMI devices. Power on and off
remote machines, and check their current
status.
Chapter 7, Page 145
Terminal Profile
Menu
Configure a menu of commands that will
be presented to the user when they power
on their computer terminal and login to the
ACS. This is a special application used
only when the ACS is being used as a
server with terminals attached.
Chapter 7, Page 152
To Next Page
Loading...
