Cyclades AlterPath ACS - Adding Users and Configuring Ports Using the Web Manager; Enabling Ports and Assigning Users; Other Methods of Accessing the Web Manager

AlterPath ACS Installation, Administration, and User’s Guide 49
Other Methods of Accessing the Web Manager
Adding Users and Configuring Ports Using the
Web Manager
Enabling Ports and Assigning Users.
Note: From the factory, ACS is configured with all serial ports disabled.
• The administrator can add users, enable or disable the serial ports, and
select and assign specific users to individual ports. For detailed
information on managing users and ports see Appendix 9 "Security Menu
& Forms" and Appendix 10 "Ports Menu & Forms".
For additional configuration and administration options, and other important
related information, see the chapters in the ACS user manual that are listed in
the following table.
Other Methods of Accessing the Web Manager
You can access the Web Manager using one of the following methods.
Topic Where Documented
Installation and Configuration Process. Appendix 2 "Installation and
Configuration"
For Regular Users - How to use the Web
Manager to access servers and connected
devices.
Appendix 3 "Web Manager for Regular
Users"
Web Manager in Wizard Mode. Appendix 5 "Configuring ACS in
Wizard Mode"
Web Manager in Expert Mode. Appendix 6 "Configuring the ACS in
Expert Mode"