Cyclades AlterPath ACS - To Associate an Alias to a Serial Port; To Configure Serial Port Settings to Match the Connected Devices

AlterPath ACS Installation, Administration, and User’s Guide 267
8. If you are finished, click “Done.”
9. Click “apply changes.”
T To Associate an Alias to a Serial Port
An alias (name) can be associated to a port when it’s individually selected for
modification. To associate an alias to a port perform the following steps.
1. Go to Ports > Physical Ports in Expert mode, select a port to modify, and
click the Modify Ports button.
2. Enter the desired string in the Alias field.
3. Click “Done.”
4. Click “apply changes.”
Note: The Alias field cannot be set if you select the “Modify All Ports”.
T To Configure Serial Port Settings to Match the connected
devices
The settings for a serial port must match the connection settings on the
connected device.
1. Go to Ports > Physical Ports in Expert mode, and select a port or ports to
modify.
The General form appears.