Cyclades AlterPath ACS - Table 11-7: Expert > Boot Configuration Form Fields

Administration Menu & Forms
318
The following table describes the boot configuration form fields.
Table 11-7: Expert > Boot Configuration Form Fields
Field Name Definition
IP Address assigned
to Ethernet
A fixed IP address or a DHCP assigned IP
address to the ACS unit.
Watchdog Timer
Whether the watchdog timer is active or
Inactive. If the watchdog timer is active, the
ACS reboots if the software crashes.
Unit boot from
Specify whether to boot ACS from flash or
from the network.
Boot Type
Select to boot from a TFTP server, a
BOOTP server, or both.
Boot File Name
Filename of the boot program.
Server’s IP Address
The IP address of the TFTP or the BOOTP
server.
Console Speed
An alternative console speed from 4800 to
115200 (9600 is the default).
Flash Test
Select to test boot from the Flash card. You
can Skip this test or do a Full test.
RAM Test
Select to test boot from RAM. You can Skip
this test, do a Quick test, or a Full test.
Fast Ethernet
The speed of the Ethernet connection. Select
the appropriate Ethernet setting if you need
to change the Auto Negotiation (default
value)
100BaseT Half-Duplex
100BaseT Full-Duplex
10BaseT Half-Duplex
10BaseT Full-Duplex