Cyclades AlterPath ACS - Configuring a CDMA PCMCIA Card; To Configure a Wireless LAN PCMCIA Card

Network Menu & Forms
180
T
To Configure a Wireless LAN PCMCIA Card
1. Install the wireless LAN card and select “Wireless LAN” from the pull-
down menu on the PCMCIA Management form.
2. In the “IP address” field, enter an IP address.
3. In the “Network Mask” field, enter the netmask for the subnet.
4. In the “MyPrivateNet (ESSID)” field, enter the SSID for communicating
with others in your network.
5. In the “Channel” field, enter a channel number.
6. Click the “Encrypted” checkbox, if an encrypted data communication is
required.
7. Enter a unique key for decoding the encrypted data.
8. Click OK.
9. Click “apply changes.”
Configuring a CDMA PCMCIA Card
You can use the “PCMCIA Management” form under “Network” to configure
a CDMA PCMCIA card. When you select “CDMA” from the pull-down
menu, the dialog box shown in the following figure appears.
Key
The key or password to decode the encrypted
data.
Field Name Definition