Cyclades AlterPath ACS - Data Buffering; Table 10-7: Expert > Procedures to Configure an Authentication

Ports Menu & Forms
274
6. Make sure that an authentication server is specified for the selected
authentication type.
The following table lists the procedures that apply to each authentication
method.
Data Buffering
Under Ports > Physical Ports in Expert Mode, after you select one or more
serial ports, and click the Modify Port(s), you can select the Data Buffering
form from the tabbed menu. The following form appears.
Table 10-7: Expert > Procedures to Configure an Authentication Server
Authentication Method Where Documented
Kerberos, Kerberos/Local, or Kerberos/
DownLocal
"To Configure a Kerberos Authentication
Server" on page 233.
LDAP, LDAP/Local, or LDAP/DownLocal
"To Configure an LDAP Authentication
Server" on page 231.
NIS, Local/NIS, NIS/Local, or NIS/
DownLocal
"To Configure a NIS Authentication
Server" on page 235.
RADIUS, Local/RADIUS, RADIUS/Local,
or RADIUS/DownLocal
"To Configure a RADIUS
Authentication Server" on page 228.
TACACSPlus, Local/TACACSPlus,
TACACSPlus/Local, or
TACACSPlusDownLocal
"To Configure a TACACS+
Authentication Server" on page 229.