Cyclades AlterPath ACS - To Delete a User; To Change a Password

AlterPath ACS Installation, Administration, and User’s Guide 101
b. To create an account with administrator privileges, select “Admin”
from the “Group” pull-down menus.
Note: To define a new group, switch to ”Expert” mode, and select Security > Users
and Groups.
4. Select whether the user of this group is a NonBio or a BioUser. The
BioUser group should only be selected if authentication is made through
the Cyclades AlterPath Bio (biometric authentication).
5. Enter the default shell in the “Shell” field (optional).
6. Enter comments to identify the user’s role or configuration in the
“Comments” field (optional).
7. Click OK.
8. Click the “apply changes” button.
T To Delete a User
1. Select “Step 3: Access.”
The “Access” form displays.
2. Select the user name to delete.
3. Click “Delete.”
4. Click “apply changes.”
T To Change a Password
Caution: Leaving the default “root” password unchanged leaves the ACS and
connected devices open to anyone who knows the default password and the
ACS’s IP address. For security reasons, change the “root” password from the
default “tslinux” as soon as possible.
1. Select “Step 3: Access.”
The “Access” form displays.
2. Select the name of the user whose password you want to change.