Cyclades AlterPath ACS - Figure 10-12: Expert > Ports > Physical Ports > Terminal Server; Figure 10-13:Connection Protocols > Terminal Server

AlterPath ACS Installation, Administration, and User’s Guide 261
The General form appears with the number(s) of the selected port(s) next
to the Done button at the bottom of the form, and the active tabs
highlighted in yellow.
Figure 10-12: Expert > Ports > Physical Ports > Terminal Server Connection
3. To change the connection protocol, select a Terminal Server connection
from the “Connection Protocol” pull-down men, “Telnet”, “SSHv1”,
“SSHv2”, “Local Terminal”, or “Raw Socket”.
Figure 10-13:Connection Protocols > Terminal Server