Cyclades AlterPath ACS - Figure 10-9: Expert > Ports > Physical Ports > Bidirectional Telnet Connection; Figure 10-10: Connection Protocols > Bidirectional Telnet

AlterPath ACS Installation, Administration, and User’s Guide 259
The General form appears with the number(s) of the selected port(s) next
to the Done button at the bottom of the form, and the active tabs
highlighted in yellow.
Figure 10-9: Expert > Ports > Physical Ports > Bidirectional Telnet
Connection
3. To change the connection protocol, select Bidirectional Telnet from the
“Connection Protocol” pull-down men.
Figure 10-10: Connection Protocols > Bidirectional Telnet