Configuring ACS in Wizard Mode
104
Figure 5-14:Wizard > Step 5: Data Buffering [Remote]
The following table provides description for each field whether local or
remote destination is selected.
Table 5-6: Wizard > Data Buffering Field Names and Definitions
Field Name Definition
Destination
Where the buffer files should be stored. Local, for
example, flash, or Remote on a server.
Mode
For Local Destination - Select Linear for sequential files,
or Circular for non-sequential format.
Local data buffering stores data in circular or linear mode.
In circular mode, data is written into the specified local
data file until the upper limit on the file size is reached;
then the data is overwritten starting from the top of the file
as additional data comes in. Circular buffering requires the
administrator to set up processes to examine the data
during the timeframe before the data is overwritten by new
data.
To Next Page
Loading...
