AlterPath ACS Installation, Administration, and User’s Guide 133
Applications
Users Manager
On the “Users Manager” form under Applications > IPDU Power Mgmt., you
can assign users to outlets.
The following figure shows the form with two users listed for a dual AlterPath
PM. The AlterPath PM is connected to serial port 1, which is configured for
power management.
Figure 7-10: IPDU Power Mgmt> Users Manager
If more than one serial port is configured for power management, multiple
users lists appear, one for each IPDU power management port.
Clicking “Add” brings up the following dialog box where you can specify one
or more comma-separated user names and one or more outlets.
Figure 7-11:Expert > IPDU Power Mgmt. > Users Manager > Add User
To Next Page
Loading...
