Cyclades AlterPath ACS - IPDU Multi-Outlet Ctrl; To Upgrade Software on an Alterpath PM

AlterPath ACS Installation, Administration, and User’s Guide 139
Applications
T
To Upgrade Software on an AlterPath PM
Perform this procedure to upgrade the software on an AlterPath PM.
This procedure requires the following:
• A more-recent version of the AlterPath PM software than the one shown
on the “Software Upgrade” form, which is available from Cyclades web
site.
• You downloaded the more-recent version of the AlterPath PM software
and copied it into the ACS’s /tmp directory with the filename
pmfirmware.
1. Go to Applications > Power Mgmt. > Software Upgrade.
The Software Upgrade form displays.
2. Click the Refresh button.
If a /tmp/pmfirmware exists containing a more recent version of the
PM firmware than the one currently installed, an “Update” button
appears.
3. Click “Update.”
4. Click “apply changes.”
IPDU Multi-Outlet Ctrl
Selecting Applications > IPDU Multi-Outlet Ctrl display the following form
used for managing power on a group of outlets that provide power to a multi
power supply server or device connected to a serial port.